How do I use bandwidth control on TP-Link wireless router?
Let’s first take a glance on why bandwidth control is required?
Within a standard home network, the bandwidth is shared by all computers. This shows that any PC using applications of high-bandwidth, i.e., torrent programs or other software of P2P, shall affect the other PCs. This may too have an ill effect on the entire network’s performance.
So, how one may stay away from this?
Bandwidth Control is a direct & straightforward solution. Why is it so? When the connection is facing heavy load, it is required to lower the impact caused.
One may a particular maximum or minimum bandwidth for each PC, which shows they have low interference on one another, using Bandwidth Control.
Kindly read this article thoroughly to get the best out of it.
Setup Bandwidth Control on TP-Link Router
The bandwidth is shared among the gadgets when lots of devices are joined to the same network.
Any gadget which is utilizing high-bandwidth apps like video streaming or torrent then bandwidth (all of them) will move towards those gadgets. This process thus will impact the speed & connectivity of all the other devices on the network.
If one keeps the bandwidth control on the router, this may be easily avoided. One may give a particular maximum or minimum bandwidth for every gadget with Bandwidth Control, & that gadget shall not be able to use bandwidth beyond that limit.
How do I use bandwidth control on TP Link wireless router?
Make sure that one is joined to the TP-Link network, either through an Ethernet Cable or wirelessly.
Now, follow the steps below to set up Bandwidth Control on the TP-Link Router.
- Initially, click on a web browser.
- Now, one may move towards the http://tplinkwifi.net link.
- A sign-in page will appear, ss one shall click. Use the default user id and password to sign- in. Here, the default user-id & Passkey are both admins.
- One can reach to the section of Bandwidth Control-Control Settings, ss one is logged in.
- Here, snap on the checkbox saying “Enable Bandwidth Control” to mark it.
- Click on the Line Type.
- Get in the Egress Bandwidth & Ingress Bandwidth in the related fields.
- The upload speed given by the ISP is known as Egress Bandwidth whereas while the download speed provided by the ISP is known as Ingress Bandwidth.
- Write the true values of bandwidth in the provided fields as given by the ISP.
- Snap-on Save to get to the settings.
- Here, reach to Bandwidth Control > Rules List.
- Snap-on the button called Add New.
- Type all the necessary details in the given fields.
- Write the maximum & minimum that one wants to give to a particular gadget, in the fields of Egress and Ingress Bandwidth.
- Once you are done with all the necessary changes, do not forget to Save.
- Finally, for other connections, one may add more entries too.
CONFIGURE QoS (Quality of Service) ON TP-LINK ROUTER
This provides access to separate the bandwidth between the gadgets joined over the internet.
QoS decreases the causes of poor connection when various gadgets are joined to a similar broadband connection, & assigns traffic priority.
Now, kindly follow these steps on how to configure QoS on TP-link router easily.
- Initially, Switch ON the TP-Link router & join the PC to it.
- Type the LAN IP Address of the TP-Link router on the URL of the browser when you have clicked on a web browser on the PC.
- The details are given by the ISP or on the paper found on the base of the router, one may easily get the IP address of the router.
- Sign-in to the router setup page by having the right User id and Passkey.
- For the TP-Link Wi-Fi router, the default User Id & Pass Key is ‘admin’. Now, follow to configure QoS on instructions provided with TP-link router.
- Now, move to the Advanced settings –> QoS –> Settings.
- Select the option: NAT Boost.
- The Boost for QoS and NAT may not be enabled at the similar time, hence first disable the NAT Boost to allow the feature of QoS.
- Don’t choose the checkbox of NAT Boost & select the QoS checkbox.
- Choose the button Save.
- Type in the max download & upload bandwidth limit under the ISP or Internet Service provider bandwidth.
- By utilizing the option Advanced, one may too keep the percentage of bandwidth priority.
- Choose the option Advanced & keep the percentage limit for the options which are: High priority, Middle priority, & Low priority. Finally, kindly locate as to configure QoS on TP-link router.
- Snap on the tab Save to keep the settings made safely.
- Here, add QoS rules, only by selecting the button “Add” from the High priority column.
- Keep the ‘By Application’ as a QoS rule type & keep the application as FTP.
- If one wishes to choose the application, type in the Protocol, Server name, & Port number in the window of the Custom application.
- For Middle priority, snap on the button OK to move to the QoS rule while using how to configure QoS on TP-link router guidelines.
- From the Middle priority column, choose the button Add & as the QoS rule type, set ‘By Device’.
- Choose the option which is, View Existing Devices & select the corresponding gadget from the List.
- Choose the button OK to make the changes that one has applied.
- By snaping the Delete icon found close to the rule list, one may too delete the saved QoS rule list.
- Ultimately, the QoS is configured on the TP-Link, by utilizing on how to configure QoS on TP-link router guidelines.
When one follows all these steps/points step by step, one may get to know that these are easy to be followed & applied.